Large Capacity High Speed Automatic Vacuum Mounting Press VXQ-1
Download Technical Data: iqualitrol Vacuum Mounting Press VXQ-1
Main Features:
1. Built-in low-noise vacuum pump, fast vacuuming speed and high
vacuum degree.
2. Fully transparent ultra-large vacuum chamber, which can hold up
to 12 samples (40mm diameter).
3. Electric rotating table and manual knob pouring, convenient and
fast.
4. According to different materials and samples, 80 sets of process
parameters can be saved and recalled.
5. Program control can set the vacuum degree, cycle number and
corresponding time, and automatically complete the entire inlay
process of multiple samples, multiple vacuuming, maintaining
vacuum, and deflation cycles.
Brief Introduction:
Mounting is a very important step in the preparation process of
metallographic specimens, especially for some tiny samples that are
difficult to hold, irregularly shaped specimens that require edge
protection, or specimens that require automatic grinding and
polishing.
The iqualitrol latest VXQ-1 vacuum mounting machine has a compact
design, large capacity, simple and fast operation, and high
equipment reliability. The built-in vacuum pump can evacuate
quickly and effectively.
It is suitable for vacuum cold mounting of epoxy resin. It can
effectively remove bubbles in the sample and resin, allowing the
resin to penetrate into the pores and cracks of the sample to
obtain a sample without bubbles and pores, improve the final
mounting effect of the specimen.
It is very suitable for porous materials, such as the preparation
of failure analysis specimens for cracks, porous castings and
composite materials, electronic components, rocks, minerals,
ceramics, etc.
Application Range:
VXQ-1 is used for the preparation of failure analysis samples of
cracked, porous castings and composite materials, electronic
components, rock minerals, ceramics and other samples.
Technical Specifications:
| Model | VXQ-1 |
| Vacuum degree | 0~-80kPa |
| Vacuum flow | 10~20L/min |
| Noise | ≤55dB |
| vacuum chamber | Φ250mm×85mm can hold up to 12 samples (40mm diameter). |
| Work panel control | Clockwise and counterclockwise |
| Operation | Touch Screen, |
| timing cycle | 0~99min, Automatic pumping/deflating,auto cycling |
| Max cycling times | 99 times |
| Program saving | 80 groups |
| Power supply | AC220V, 50Hz, 10A |
| Dimension | 462×400×310mm |
| Net weight | 24KG |
